| Fein
Turbo II Vac
Model No. 9-55-13
 The
New Fein Turbo II Dust Extractor is powered by a
two stage motor, with by-pass cooling. By-pass cooling
assures that the motor runs cool even if the hose
or filter are blocked.
With
lower weight and smaller overall dimensions than
the old Fein Vac I, you'll find the NEW Turbo II
easier to move, carry and store.
When
you plug your Fein Dust-Free Sander into the outlet
on the Fein Turbo II's face-plate and set the switch
to Auto, the extractor starts automatically when
the Sander is switched on. Turning the sander off
also turns off the extractor. This way, the Fein
Turbo II operates when you need it - not all the
time. Our Automatic On/Off electronic will handle
power tools with inputs of 40 to 2000 watts (0.3
- 19 Amps).
If
you're familiar with our old extractor, then you
were probably concerned about the cost of replacement
filter bags. The Fein Turbo II comes standard with
a fabric boot that contains dust down to 5.0 microns.
To empty the vacuum, simply remove the fabric boot
and empty the vacuum. You don't need a filter bag
unless you want one. If you'd like, we can also
supply a pleated filter and containment bag similar
to the Fein Vac I. HEPA filters are also available.
| Specifications |
| Model
No. |
9-55-13 |
| Autostart |
Yes |
| Voltage |
120
V |
| Watts |
1300W |
| Static
Water Lift |
90
in. |
| Air
Flow |
116
cfm |
| Weight |
28.5
lb |
| Power
Cord Length |
16
ft. |
| Hose
Length |
16
ft. |
| Hose
Diameter |
1.25
in. |
| Capacity
Dry |
9
gal. |
| Capacity
Wet |
6.8
gal. |
| Dimensions |
24¾x16½x15¾ |
| Noise
at 3.5 ft. |
57.5
dB(A) |
Fein Turbo II Vac with Cloth Filter Bag
Model 9-55-13
Our Price: $329.00
OUR #1 SELLER & BEST VALUE!
Fein Turbo II Vac with 1.0 Micron Filter
Model 9-55-13
Our Price: $349.00
Fein Turbo II Vac with 0.3 Micron HEPA Filter
Model 9-55-13
Our Price: $409.00
|
